Unity Power & Light provides professional dedicated circuit installation for homes and businesses throughout Aiken, SC. Whether you're upgrading your kitchen, setting up a home office, or installing new appliances, dedicated circuits ensure safe, reliable power delivery that meets National Electrical Code requirements.
A dedicated circuit serves a single appliance or specific area without sharing electrical load with other devices. This prevents overloading, reduces fire risk, and ensures your appliances operate at peak efficiency. Our licensed electricians install dedicated circuits for kitchens, laundry rooms, workshops, HVAC systems, and more—all with transparent pricing and code-compliant workmanship.
Our Dedicated Circuit Services
Kitchen Dedicated Circuits
Modern kitchens require multiple dedicated circuits to meet NEC requirements and handle today's appliances safely. We install:
- Two 20-amp small appliance circuits for countertop outlets
- Dedicated refrigerator circuit (15 or 20-amp)
- Dedicated dishwasher circuit (15 or 20-amp)
- Dedicated garbage disposal circuit (15 or 20-amp)
- Dedicated microwave circuit (20-amp)
- Electric range circuit (40 or 50-amp, 240-volt)
Many Aiken homes—especially those built before the 1990s—lack adequate kitchen circuits. We assess your current electrical system and install all necessary circuits to bring your kitchen up to code.
Laundry Room Circuits
Laundry rooms have specific electrical requirements to handle high-power washing and drying equipment:
- Electric dryer circuit (30-amp, 240-volt)
- Washing machine circuit (20-amp, 120-volt)
- Separate circuit for laundry room outlets
- Proper GFCI protection where required
Modern high-efficiency washers often include heating elements that draw significant current. A dedicated circuit prevents overloading and ensures reliable operation.
Home Office Circuits
With more Aiken residents working from home, dedicated office circuits have become essential:
- 20-amp circuits for computers and peripherals
- Surge-protected circuits for sensitive electronics
- Multiple outlets to eliminate extension cords
- Proper grounding for equipment protection
Computers, monitors, printers, and networking equipment all benefit from clean, dedicated power. We design circuits that keep your home office running reliably without interference from other household loads.
Workshop & Garage Circuits
Power tools and workshop equipment require robust electrical service:
- 20-amp circuits for power tool outlets
- 240-volt circuits for table saws, welders, and compressors
- Dedicated circuits for garage door openers
- Outdoor-rated circuits for external equipment
Whether you're a hobbyist or professional tradesperson, we install the circuits you need to power your workshop safely and effectively.
HVAC Dedicated Circuits
Heating and cooling systems must have dedicated circuits to function properly:
- Central air conditioner circuits (30-60 amp, 240-volt)
- Heat pump circuits (40-60 amp, 240-volt)
- Furnace blower circuits (15-20 amp)
- Emergency disconnect switches per code requirements
Aiken's hot summers demand reliable air conditioning. We ensure your HVAC system has the dedicated power it needs to keep your home comfortable year-round.
Specialty Circuits
We also install dedicated circuits for specialized equipment:
- Electric vehicle chargers (40-60 amp)
- Hot tubs and spas (40-60 amp, 240-volt)
- Pool and fountain pumps
- Sump pumps and well pumps
- Electric water heaters (30-50 amp, 240-volt)
- Whole-house fans and attic ventilation
Our Installation Process
Initial Assessment
We begin with a thorough inspection of your electrical panel and existing wiring. We check available capacity, evaluate panel condition, and determine the best routing for new circuits. If your panel is at capacity or outdated, we'll discuss panel upgrade options.
Circuit Planning & Design
Based on your needs and NEC requirements, we design the appropriate circuits. This includes selecting proper wire gauge (typically 12 AWG for 20-amp circuits, 10 AWG for 30-amp, etc.), breaker size, and outlet types. We explain all options and provide a detailed written estimate.
Professional Installation
Our licensed electricians run new wiring from your panel to the appliance location. In finished spaces, we take care to minimize wall damage, using existing pathways where possible. We install proper outlet boxes, make secure connections, and ensure all work meets South Carolina electrical code.
Testing & Verification
Before we consider the job complete, we thoroughly test each circuit. We verify proper voltage, check ground continuity, test GFCI/AFCI protection where required, and ensure all connections are secure. Your circuits must pass our rigorous quality standards.
Cleanup & Documentation
We patch any access holes, clean up all debris, and leave your home as we found it. We provide documentation of the work performed, including circuit labeling on your electrical panel for easy future reference.
Pricing for Dedicated Circuit Installation
Dedicated circuit installation typically costs between $200 and $500 per circuit in the Aiken area. Several factors affect the final cost:
Circuit Type
- Standard 15-20 amp (120V): $200-$350
- Heavy-duty 20-30 amp (120V): $250-$400
- 240-volt circuits (30-60 amp): $350-$500
Distance & Accessibility
- Close to panel: Lower cost
- Long wire runs: Higher material costs
- Finished walls: More careful installation required
- Difficult routing: May increase labor time
Additional Factors
- Panel capacity: Full panels may need upgrade
- Permits: Required for some jurisdictions
- Special requirements: GFCI, AFCI, outdoor ratings
- Multiple circuits: May offer volume pricing
Panel Upgrades: If your electrical panel doesn't have capacity for additional circuits, you may need a panel upgrade. This typically costs $2,000-$4,000 but provides long-term value by modernizing your entire electrical system. We'll discuss all options during our assessment.
Unity Power & Light provides detailed written estimates before beginning work. Our flat-rate pricing means no surprises—you'll know the cost upfront.
Why Choose Unity Power & Light?
Licensed & Experienced
We hold South Carolina Electrical Contractor License #117080 and have extensive experience with dedicated circuit installation in Aiken homes and businesses. Our electricians stay current with NEC updates and local code requirements.
Code-Compliant Work
All our installations meet or exceed National Electrical Code requirements. We obtain permits where required and ensure your electrical work passes inspection. This protects your safety and your home's value.
Transparent Pricing
We provide detailed written estimates with flat-rate pricing. You'll know exactly what the work will cost before we begin—no hidden fees or surprise charges.
Veteran Owned
As a veteran-owned business, we bring military precision and commitment to every job. We show up on time, work efficiently, and maintain the highest standards of professionalism.
Fully Insured & Bonded
We carry comprehensive liability insurance and bonding to protect our clients. You can have confidence that you're working with a legitimate, professional electrical contractor.
Customer-Focused Service
We take time to explain your options, answer questions, and ensure you understand the work being performed. Your satisfaction is our priority.
Frequently Asked Questions
How do I know if I need a dedicated circuit?
Common signs include frequent breaker trips when using appliances, dimming lights when appliances turn on, warm outlets, or buzzing sounds. Additionally, if you're installing a new major appliance like a refrigerator, dishwasher, or electric dryer, it likely requires a dedicated circuit per NEC requirements.
Can I just replace a breaker with a larger one instead of adding a circuit?
No. This is dangerous and violates electrical code. Breakers are sized to match the wire gauge. Installing a larger breaker on existing wiring allows more current than the wire can safely handle, creating a serious fire hazard. The proper solution is to install a new circuit with appropriately-sized wire and breaker.
How long does dedicated circuit installation take?
Most single-circuit installations can be completed in 2-4 hours. Multiple circuits or complex routing may take a full day. We provide time estimates during our initial assessment.
Will you need to cut holes in my walls?
In finished spaces, we sometimes need small access holes to run wiring. We minimize damage by using existing pathways (through basements, crawlspaces, or attics) whenever possible. Any necessary holes are carefully patched and finished to match your walls.
Do I need a permit for dedicated circuit installation?
Requirements vary by jurisdiction. Some local municipalities in the Aiken area require permits for electrical work, while others do not. We handle all permit requirements as part of our service.
Can you install circuits in older homes?
Yes. We frequently work with older Aiken homes. We assess the existing electrical system, including panel capacity and wiring condition, and recommend the best approach. Sometimes panel upgrades are necessary, which we can also perform.
Learn More About Dedicated Circuits
For an in-depth guide to dedicated circuits, including NEC requirements and how to identify when you need circuit upgrades, read our comprehensive blog post: Why Your Aiken Kitchen Needs Dedicated Electrical Circuits.
Ready to Install Dedicated Circuits?
Serving Aiken, SC and surrounding communities including North Augusta, Graniteville, New Ellenton, Jackson, and Clearwater. Get your flat-rate quote today.